Brooder warmer fully automatic intelligent heater furnace

Product name:

Brooder warmer fully automatic intelligent heater furnace brooder umbrella chicken duck goose house heater breeding equipment

Product parameters:

Product material: All aluminum

Product voltage: 220V, can also be customized 380V

Dimensions: 73 * 25 * 47 (CM)

Net weight: 9.8KG

Power: 1000 watts-5000 watts, a total of 5 heating tubes, each 1000 watts, can open 1, 3, or 5 can be selected according to the actual situation

Note: This machine does not contain electrical wires

Applicable objects: poultry

Scope of application: This product is suitable for chickens, ducks, geese, pigeons, scorpions and other places that require insulation and temperature control.

Product advantages:

Easy installation, simple operation, adjustable temperature, environmental protection and pollution-free, automatic temperature control, can make the space temperature uniform, reduce labor costs, and can greatly improve the survival rate of brooding. The special intelligent warmer for breeding can transfer the heat to the surroundings, make the temperature of the entire room uniform, suitable for flat breeding and three-dimensional breeding.

Conditions of use of this product:

The voltage must reach 220V. The wires are copper wires. Generally, a 2.5 square copper wire can be used. The current temperature is calculated based on a 15 square meter chicken house with a height of 2 meters. Please do not buy if your own environmental conditions are not up to standard! Conditions to achieve the rest assured to buy, the effect of leverage!

Product Features:

1. Using microcomputer constant temperature control, the temperature can be adjusted freely. Set the start temperature and stop temperature freely. When the temperature exceeds the set stop temperature, the power will be automatically cut off to stop the heating. When the temperature is lower than the set start temperature, the machine will automatically resume the power-on heating to save energy.

2. After setting the temperature, there is no need to care for it manually, and the temperature is controlled automatically throughout the process.

3. The heating body has no glare and strong light pollution, has the function of promoting blood circulation of animals, helps the healthy growth of brooders, and is known as a health-care heater.

4. It can transfer heat to the ground and surrounding area, so that the temperature of the entire room is uniform.

5. Easy installation, environmental protection and no pollution.

Installation and operation:

If it is flat breeding (ground breeding), place the warmer in the center of the site. You can also adjust the height yourself according to the actual situation, and connect the power supply after installation. The number of warmer installations depends on the size of the site and the required temperature. But different. After the installation is completed, turn on the switch. At this time, the start temperature and stop temperature are set and the temperature control is started. For example, the start temperature is set to 36 degrees, the set stop temperature is set to 38 degrees, and when the temperature of the holding chamber is lower than 36 degrees The warmer starts to warm up. When the temperature reaches 38 degrees, it will automatically stop heating, so it will automatically control the temperature repeatedly. The set start temperature must be lower than the stop temperature, otherwise the heater cannot work normally. (The better the thermal insulation of the site, the longer the heating tube will be closed, and the more power will be saved).

Heating effect

In winter, a single product can keep a room of about 20 square meters warm at about 38 degrees. When the minimum temperature in other seasons exceeds 15 degrees, a room of about 25 square meters can reach about 38 degrees. The product is used in conjunction with a hot blast stove, which has excellent temperature control effect, saves labor costs, and greatly improves the survival rate of brooding. (Note: The product heating time depends on the size of the space and the insulation).

power consumption

When the product heats up, it uses 2.5 degrees of electricity per hour. When the temperature reaches the set temperature, the machine enters a constant temperature state.

Generally, a better insulation room is set to a constant temperature, and the temperature is set to 38 degrees in 20 square meters, and electricity is used at about 10 degrees 24 hours a day.

Summer insulation

In summer, the temperature of the insulation room is not easy to control. When the temperature is high during the day, it is not necessary to heat it. At night, the temperature will be too low. At this time, use our intelligent heat preservation device. The thermostat will automatically turn on the heating. Save worry and save power.

-1 is a temperature reduction button, 2 is a heating button, the microcomputer constant temperature control,

the temperature can be freely adjusted.

-3 is the main power switch, 4 and 5 are heating power switches, easy to operate, easy to install,

environmentally friendly and pollution-free.

-Product voltage: 220V, can also be customized 380V;Dimensions: 73 * 25 * 47 (CM);Net weight: 9.8KG

-Power: 1000 watts-5000 watts, a total of 5 heating tubes, each 1000 watts, can open 1, 3, or 5 can be

selected according to the actual situation.

upgraded heating pipes, fast heating, no glare, heat balance, conducive to efficient breeding.

-2MM thick aluminum body, exquisite workmanship, fast heat transfer speed, high strength, corrosion resistance,

no rust, lighter.

-Customer photo display.

-Customer photo display.

-Customer photo display.

-Customer photo display.

-Customer photo display.